Top Selling Points
- Ultra-Lightweight (85g) with IP67 protection
- Plug-and-Play Integration via open-source SDK
- Real-Time Data Output (10Hz refresh rate)
- Energy Efficiency (0.05W standby power)
Applications:
- Drone-based topographic mapping
- Autonomous vehicle navigation
- Smart warehouse inventory management
- Solar farm maintenance monitoring
Specifications:
| Parameters | Index |
|---|---|
| Operating Wavelength | 905nm ±5nm |
| Ranging Capacity | ≥1500m (large targets) |
| Blind Zone | ≤10m |
| Ranging Accuracy | ≤(1 + L × 0.25%) m (Note: L = target distance) |
| Ranging Frequency | Single-shot, 1Hz, 2Hz |
| Product Weight | ≤20g |
| Dimensions | ≤φ23mm × 46mm (diameter × length) |
| Power Supply Voltage | 2.5V–3.5V (Nominal 3.3V) |
| Power Consumption | Standby: ≤0.6W@3.3V Operating: ≤0.8W@3.3V |
| Environmental Tolerance | Operating Temperature: -20℃ to +50℃ |
Electrical Interface
The electrical interface specifications are as follows:
- Power Supply Voltage: 2.5V to 3.5V (Nominal 3.3V)
- Standby Power Consumption: ≤0.6W @3.3V
- Average Power Consumption: ≤0.8W @3.3V
- Connector Compatibility: The host computer connects to the rangefinder via an LNN100-157128-200-4P connector for interface testing with the rangefinder’s A1002WR-S-4P connector. Pin definitions are listed in Table 1, and Pin 1 orientation is shown in Figure 3.
Table : Power Supply and Communication Port Pin Definitions (Rangefinder Side)
| Pin No. | Label | Electrical Definition | Signal Direction |
|---|---|---|---|
| P-1 | VIN+ | Positive Power Input | Power Supply |
| P-2 | VIN- | Negative Power Input | — |
| P-3 | TTL_RXD | Signal Input Port | Host to Rangefinder |
| P-4 | TTL_TXD | Signal Output Port | Rangefinder to Host |
Certifications: CE, FCC, RoHS, REACH
Legal Compliance: Specifications meet EU/US export controls for civilian use. No ITAR/MLRS-related components.
[Contact SUNFLASER for OEM/ODM customization and bulk pricing.]
Reviews
There are no reviews yet.