Key Selling Points
- Ultra-lightweight (62g) & pocket-sized for portability
- High accuracy (±1m) with 98% measurement reliability
- Class 1 laser safety (905nm) compliant with international standards
- Low power consumption (≤2W) & wide voltage range (4.5V-5.5V)
- Dust/water-resistant construction for harsh environments
Applications
- Industrial automation, drone navigation, topographic mapping, forestry surveys, smart infrastructure, and robotics.
Specifications
| Parameter | Specification |
|---|---|
| Operating Wavelength | 905nm ±5nm |
| Measuring Range | ≥3000m (large targets) |
| Minimum Ranging Distance | ≤15m |
| Ranging Accuracy | ±1m |
| Accuracy Rate | ≥98% |
| Ranging Frequency | Single-shot, 1Hz, 2Hz |
| Weight | ≤62g |
| Dimensions | ≤50.5mm × 49.5mm × 29mm |
| Power Supply Voltage | 4.5V–5.5V |
| Power Consumption | Standby: ≤1W Operating: ≤2W @5V (1Hz) |
| Environmental Adaptability | Operating Temperature: -20°C to +50°C |
Note: All performance specifications and interfaces can be customized to meet specific requirements.
Electrical Interface
The electrical interface requirements are as follows:
- Power Supply Voltage: 4.5V–5.5V
- Standby Power Consumption: ≤1W
- Average Power Consumption: ≤2W @3.3V (1Hz mode)
- Connector Compatibility: The host machine interfaces with the laser rangefinder via an 8-pin connector. Pin definitions for the rangefinder’s power and communication port are detailed in Table . Pin 1 orientation is shown in Figure .
Table : Laser Rangefinder Power Supply & Communication Port Pin Definitions
| Pin No. | Label | Electrical Definition | Signal Direction |
|---|---|---|---|
| P-1 | VIN+ | Positive Power Input | Power Supply Input |
| P-2 | — | Reserved | — |
| P-3 | VIN- | Negative Power Input | Power Supply Return |
| P-4 | — | Reserved | — |
| P-5 | NC | Not Connected | — |
| P-6 | GND | Ground | Ground Reference |
| P-7 | UART_TXD | UART Transmit Data | Rangefinder to Host |
| P-8 | UART_RXD | UART Receive Data | Host to Rangefinder |
Reviews
There are no reviews yet.