Key Selling Points
- Eye-Safe 1535nm Laser: Compliant with IEC 60825-1 safety standards.
- Ultra-Compact Design: 66x59x42mm, perfect for space-constrained integration.
- Multi-Mode Operation: Single-shot, 1Hz, and 5Hz modes for dynamic needs.
- RS422/TTL Interface: Seamless integration with control systems.
- Low Power Consumption: ≤3W average, 5-14V DC input.
- Blind Zone Optimization: ≤80m blind zone for reliable short-range detection.
Applications
- Industrial automation & robotics
- UAVs/drones for mapping & navigation
- Autonomous vehicles & ADAS systems
- Surveying equipment & construction tools
- Security systems & perimeter monitoring
Note: Avoid exposure to direct sunlight, rapid temperature shifts, or electrostatic environments. Not for military use.
Main Functions
- Laser Ranging
- Power-on and Temperature Acquisition
- Range Gating
- First/Last Target Ranging
- Self-Test
- Serial Port Firmware Update
Specifications
| Operating Wavelength | 1535nm ±10nm |
| Ranging Capability | ≥9500m |
| Blind Zone | ≤80m |
| Accuracy | ±1m |
| Hit Rate | ≥98% |
| Resolution | ≤50m |
| Ranging Frequency | Single-shot, 1Hz, 5Hz |
| Weight | ≤102g |
| Dimensions | ≤66mm × 59mm × 42mm |
| Operating Voltage | 5V~14V DC |
| Power Consumption | Standby: ≤0.001W; Average: ≤3W |
| Environmental Compliance | Operating Temp: -40℃ to +60℃ Storage Temp: -55℃ to +70℃ |
Electric Interface
The host computer connects to the rangefinder via a 10-pin connector for interconnection testing. The pin definitions for the power supply and communication ports on the rangefinder side are listed in the following table, and the position of Pin 1 on the connector is shown in the following figure.
Table: Power Supply and Communication Port Pin Definitions (Rangefinder Side)
| Pin No. | Label | Electrical Definition | Remarks |
|---|---|---|---|
| P-1 | VIN+ | Input Power Positive | Power Supply |
| P-2 | COM | Input Power Negative | Power Supply |
| P-3 | POWER_CTL | Low-power Control Port | Floating or high level (3V–9V) active |
| P-4 | RS422_TXD+ | Signal Output Port | From Rangefinder to Host |
| P-5 | RS422_TXD- | Signal Output Port (Differential) | From Rangefinder to Host |
| P-6 | RS422_RXD- | Signal Input Port | From Host to Rangefinder |
| P-7 | RS422_RXD+ | Signal Input Port (Differential) | From Host to Rangefinder |
| P-8 | GND | Communication Ground | |
| P-9 | TTL_RXD | Signal Input Port | 3.3V TTL |
| P-10 | TTL_TXD | Signal Output Port | 3.3V TTL |
Notes:
- Differential Signals: Pins 4-5 (RS422_TXD±) and 6-7 (RS422_RXD±) form differential pairs for RS422 communication.
- TTL Interface: Pins 9-10 support 3.3V TTL-level serial communication.
- Power Control: Pin 3 (POWER_CTL) enables low-power mode when left floating or driven high (3V–9V).
Certifications
- CE, RoHS, and ISO 9001 compliant.
Reviews
There are no reviews yet.